The Silent Coin Taproom is available in resin and FDM versions. The scale for both versions is 32mm, and their volumes are the same, totaling 33cm x 23cm x 36cm, or 13’’ x 9’’ x 14’’ (width x height x depth).
To print the Taproom in resin, a build plate of at least 121mm x 68mm x 130mm, from a Phrozen Sonic Mini, is required, and it needs around 5 liters of material.
Now, for FDM, the necessary area to print the Taproom is of at least 220mm x 220mm x 250mm, from a Creality Ender 3, and it takes around 2 KG of filament, according to your infill and support settings.
___
The Silent Coin Tavern and Inn is available only for FDM printing. The scale for it is 32mm, and its volume totals 50cm x 55cm x 53cm, or 22’’ x 20’’ x 21’’ (width x height x depth).
To print the Tavern and Inn, a build plate of at least 220mm x 220mm x 250mm, from a Creality Ender 3, is necessary, and it takes from 10 to 12 KG of filament, according to your infill and support settings.
___
All our FDM prints use the following settings:
- Layer height: 0.2mm
- Nozzle size: 0.4mm (you can safely use a 0.6mm one, and never go above 0.8mm)
- Infill: 5% gyroid
Related to